Author Archive: Suzanne Gill

A Guide When Rewiring Homes

commercial electrician melbourne

If you want to rewire your home, you should know a procedure that you will follow to achieve it. When you follow the procedure well, you will be able to do it right thus preventing any forms of damages that you might experience. Here is a guide on the tips when rewiring home:

  1. Do a proper “electrical inventory”

You should ensure that you create a full list of all devices you will be using when wiring your house. When you have an electrical system that needs you to match by finding out where as well as how you will be using power to makes it pretty easier to frame those job parameters.

  1. Check out pull permits and local codes

Codes often set standards to be followed by everybody from the number of outlets you will put in every room to the kind of wire you will be using. You should get permits to enable you to finish the work whenever you need the best outcome. You should ensure that you decide on the modern wiring that does not just carry electricity, as well as wireless systems by getting more sophisticated and increasingly cheaper.

 commercial electrician melbourne

  1. Use your list when creating a detailed action plan

Once you have done your first homework, you need to sit down by creating a punch list, which focuses mainly on the things you want to do as well as duration you expect to complete them. If you have no idea how to do it, you can hire a certified commercial electrician Melbourne who will help you whenever you need to finish the plan.

  1. Watch for the existing infrastructure

Part of evading damage is by making sure that nobody punches into holes of an existing wiring. You should put a kind awareness whenever you are doing your rewiring job. You will always be sure that you will do a good job without having to threaten the lives of others. In addition, you can always put your writings on the paper for simple and flexible implementation.

  1. Find a certified electrician

You should ensure that the electrician Melbourne is certified who knows at the same time understands new models of buildings. With their experience, they will be able to work on complex buildings, which may be demanding and difficult to install wires. You can make some demolition as well as reconstruction, which makes it an integral job part whenever you want the best outcome for your home.

  1. Aim for the “home runs” for appliances and key areas

You must have a modern circuit breaker to your power outlet, where you will not have any new devices that might cause the breaker. Through this, you can reduce loads, especially on the power system at the same time keeping popped breakers, especially to a minimum.

 commercial electrician melbourne

  1. Integrate plates as well as switches

You can look for companies to offer hardware, which matches the appearance while making you install what will work well for you. You will definitely do your house wiring perfectly.

In conclusion, the above is a guide when rewiring homes to remember when looking for the best options.


How to Repair Air Conditioner Parts

air conditioning repair carlton

An air conditioner is a crucial home appliance in anyone’s house, along with a refrigerator and a stove. It’s an important part in making a home a comfortable place to live in for its inhabitants. Especially when the days and nights are particularly warm, having an air conditioner set up can be a great source of comfort and convenience for you and your family.

But having an air conditioner can also be a great source of inconvenience. Because of all the elements that make up this home appliance, it is inevitable that sometimes it will break down, and you will need to repair air conditioning.

Often this also happens right when you need an air conditioner the most.

air conditioning repair brisbane

Fear not – below is a list of quick solutions on how to repair air conditioner parts that you can do by yourself. Read on to find out more! First things first – let’s review a few safety guidelines when you plan to do air conditioning repair.

  1. Make sure the power is off and that the air conditioner is disconnected from a power supply. You should not be opening it up – or any home appliance, for that matter – while the power is running. Be sure to check a few times to see if the power is really off.
  2. Keep children and pets away from your working area. There will be tiny parts of the air conditioning that you might pull apart, and these can be points of interest for children, but also dangerous items for them to handle.
  3. Have the proper tools and cleaning materials on hand and ready for use. It would be a waste of time and a possible for potential accidents if you have to leave your work area to get tools or cleaning items you forgot. Prepare everything you will need beforehand before you start working.

heating repair coburg

1. How to repair air conditioner parts: the air filter

What usually goes wrong with the air filter of an air conditioning? Does it become too dirty and clogged with pollutants and other fine material. To remedy this, you can easily clean the air filter once you’ve taken it out of the air conditioning unit.

In some cases, the air filter will be beyond repair. Thankfully, it wouldn’t cost much to buy a replacement. In fact, replacing the air filter entirely every so often is also ideal to make sure your air conditioner is releasing clean air all the time.

2. How to repair air conditioner parts: air ducts

Air ducts in an air conditioner can also get clogged up with dirt and other material. It is best to clean your unit’s air ducts regularly with a vacuum to ensure it works without a hitch.

3. How to repair air conditioner parts: compressor

When an air conditioner is used often, its compressor can become overworked and conk out. When this happens, you can check if the compressor can be repaired or replaced entirely. While this task is often left to professionals, if you are confident you can do it yourself, you will need the correct tools and must know how to remove the refrigerant, cut the refrigerant lines, and remove the compressor so you can replace it.

Common Heater Repair Problems

heating repair

Are you currently experiencing problems with your heating system? Your heating device is an essential component of your home since you depend on it to keep you together with your family warm and cosy, especially during the winter period. There are lots of potential problems that often arise as a result of normal operation of these useful home devices. Most heater technicians agree that your failure to inspect, clean and maintain your heating system on a regular basis is perhaps the primary cause of system failures.

A large number of furnace problems you can quickly solve even without the need of contacting a professional. Of course, there are some that will eventually require the intervention of highly trained heating unit professional.

Typical heating problems which you can fix on your own

Controls are not functioning: If you are not able to regulate the functionality of your furnace, the problem often revolves around your thermostat. You’ll have to ensure it is set to the ideal temperature and then try to solve the issue perhaps by replacing the batteries. If this does not assist in resolving the issue, you’ll have to reset the thermostat as per instructions from your manufacturer.

 air conditioning perth

If all these are not fruitful, examine the electrical system of your home to see if you have any tripped circuits

The fan is not functioning: Again, this particular problem occurs when your thermostat is not set correctly. So you’ll have to reset it and examine your air filters also. If they are filthy then probably they could be restricting the free circulation of air. On most occasion, air filters that are extremely dirty have the potential to cause your fan to stop working. Again, check your circuit breakers just to make sure that they are not off. As a piece of caution, you should only turn your breakers on once. If you didn’t know, the prospect of flipping them off or on regularly could cause cases of fire.

Certain parts of your house are not heating: If your heater is not able to distribute sufficient heat evenly in your home, the problem could be due to two primary factors: Inadequate duct work and dirty air filters. Check the air filters for debris, dirt and dust particles. However, if they are not dirty, you’ll have to inspect the ducts for any leaks.

The heater doesn’t shut off: If you are unable to prevent your furnace from blowing hot air, have a look at your thermostat and ensure that it is set in auto mode. This is when it will be able to shut off after attaining a precise temperature setting. However, if this does not aid solve the issue, then there are two problems with your heating device including, a broken thermostat and a malfunctioning furnace blower. First, have a look at your thermostat’s wires to make sure that they are correctly plugged in. Next, reset the thermostat to the factory settings. If all these can’t help, you’ll have to consider replacing your thermostat.

Furnace problems you’ll definitely need professional assistance to fix

Blower or belt problems: Belt issues are arguably the most common types of fan issues. However, there are equally serious problems which can result in similar symptoms. If the system is producing high-pitched sounds, it is likely the blower itself. This is a complex issue to tackle, and you’ll need to seek heater repair professional assistance. The best possible way to ensure that you prevent the future occurrence of this particular heating problem is through conducting regular maintenance inspections.

 ducted air conditioner repair

The heater produces a burning odour

A burning smell is a clear indication that something is not right with your unit. Shut the furnace off and immediately unplug it as well. After this, inspect the whole system and look for dust, dirt or any other blockage and remove them accordingly. However, if the problem persists, call your local heater technician to see if perhaps there are any blockages in your chimney or electrical parts.

Mould in your furnace: Moisture buildup is usually the final result of inadequate duct work and poor insulation which are known to create optimal conditions for the growth of mould. If your heating unit has this particular problem, you’ll be forced to hire a qualified and licensed technician to clean the unit. Again, the professional must make additional and necessary steps to ensuring the future growth of mould is controlled. As such, the technician has to make sure that the crawl space, as well as the ducts, are adequately insulated, sealed to help avoid future accumulation of moisture.

Some of these heating problems can potentially be prevented by ensuring that you conduct timely and regular maintenance. But, when they occur, it would be an excellent idea to hire a qualified heater professional to help you fix them out.

Practical Tips On How To Avoid Recurring Heating Repair Costs

heater repair

However unwelcome utility and repair bills associated with the heating cooling system can get, you just can’t wish them away. You also just can’t turn off your heating and cooling system permanently to prevent it from breaking down or eating into your earnings. But you can practice ingenious ways of keeping these costs at a minimum by ensuring the optimal performance of your home or property HVAC system and reducing the heater repair instances. Here is how to go about it:

  1. Invest in quality heating and cooling system

Are you aware of the different factors that a professional heating system installer has to consider before recommending the right HVAC system for your home? In most cases, the size of the house and its location are the sole determinants of its energy requirements. By matching your home with the right cooling system, you are not only assured of regular minimized energy bills but also take a stride forward in keeping the heating repair cost at bay. Therefore, when shopping for your home’s HVAC system or its part replacements, only consider the cost of the system or part of it after establishing its quality.

 heating repair pakenham


  1. Have your system installed by a professional

Improper heating and cooling system installations are the leading causes of the constant system breakdowns and in effect the expensive and recurring heating repair costs. For instance, improperly installed vents for the ducted heaters resulting in blockages may be attributed to insufficient of air flow into the home. You, therefore, end up cranking the heater further up thus exposing it to malfunctions like overheating as well as reducing its estimated lifespan.

  1. Carry out regular servicing and maintenance checks

Most heating system manufacturers recommend that you subject your heating and cooling system to an annual comprehensive servicing and maintenance. This involves thoroughly checking the system operations, cleaning the ducts, changing filters, and inspecting the air circulation around the home or property. It ensures that potential system problems are detected and corrected in time. Nonetheless, such servicing must be carried out by a qualified heater repair professional with a thorough understanding of heating system operations and experienced in your particular type of HVAC.

  1. Replacing the old malfunctioning systems

How long have you been using your current heating and cooling system? Have you ever entertained the thought that it is always breaking down due to old age? In most cases, the estimated lifespan for an average heater is 15 years. However, as the system approaches its peak years, it is susceptible to more breakages, primarily due to most of its parts being worn out. In such a case, it is important to engage a heater repair specialist to advise on what is most economical between constantly repairing the current heater or overhauling and replacing it with a new one.

 heater repair

It takes more than engaging a reliable and inexpensive heating repair practitioner to reduce the heater repair cost associated with heating and cooling systems. You have to consider all factors contributing to this cost. This includes checking whether the system fits your home’s heating requirements as well as replacing the worn and dilapidated HVAC with a newer system and having it professionally installed.  

3 Questions to Ask when Looking for Commercial Electrical Contractors in Melbourne

electrical specialist

For any project that you take on, you need to hire the right people to work with you. For a construction project, in particular, getting the right man for the job is an absolute must.

The same is true for an electrician. There is a myriad of commercial electrical contractors in Melbourne, and knowing who to hire – and more importantly, who to trust – for your project is one of the most important decisions you will need to make on your construction project.

Below is a list of questions you should be asking if you are choosing among the many commercial electrical contractors in Melbourne offering their services.

  1. What is the scale of your project?

Before you start your search for an electrical repair specialist, the most important task is to clarify the details and scope of your project. Is your project a major renovation, or just some minor modifications to an existing structure? How much time do you have before you need the project completed? What is your planned budget?

Understanding the extent of your project will allow you to narrow your options of commercial electrical contractors to those who are most suited to do the job. And once you have set your expectations for the project, you’ll be able to assess proposals from a potential commercial electrician.

 electrical repair

  1. How credible are your potential commercial electrical contractors?

It’s absolutely critical to determining how reliable your chosen electrical specialist is because, at the end of it all, there is only so much you can learn from a proposal or a portfolio. Of course, you must check if a potential contractor has the proper licenses and permits for their business, but at the same time, it’s critical that you are able to get real feedback from previous teams they’ve worked with.

Ask people in your circle or those in the industry for their opinions of the contractors on your shortlist. Of course, always take other people’s input with a grain of salt, but ultimately, the more you know, the better.

  1. How thorough are the proposals of your potential contractors?

Don’t just rely on the bottom line of a proposal – contractors may submit amazingly low estimates, only for you to realize later on that they either do not fully meet your requirements or there are several elements or items missing.

What’s more, a detailed cost estimate and proposal are already good indications of the kind of work a contractor will do. More often than not, someone thorough and transparent with his proposals is more likely to be more reliable and credible than someone who isn’t. At the same time, if someone is already not thorough and conscious of the details with just the estimate, how do you assume he’ll handle the details and nitty-gritty items of your project?

 electrical specialist

The good news is there are plenty of commercial electrical contractors in Melbourne for you to choose from. The bad news is, it can get increasingly hard to find the right one for you. Don’t be afraid to approach as many contractors as you can, and be completely transparent with each one of your needs and expectations. In any project, being honest and having clear communication from the very beginning is key to making it a success.

Tips to Hiring The Right Electrician in Narangba

When you’re looking for an electrician in Narangba, look for someone that you can work within the long-term. You can save time and money if you can find an electrical specialist that you can trust and call upon whenever you have an electrical problem. There are several electricians in Narangba, but it is advised that you get the right one if you need your job done correctly.

Here are some tips that might help you find the best electrician:

Find companies that are recommended

Recommendations for companies can be got from friends and family members that have hired an electrician Narangba. You can also decide to search online for an electrician to see the various electrical companies. Most of these companies usually have licensed electricians that they can send over to your home in a matter of minutes.

Hiring your electricians from qualified companies has its benefits too as you can always be assured of getting back to them in case a problem arises. Finding a list of some of the best companies is the first step in getting the right electrician. You can go through the reviews of customers on the company’s website to see what they have to say. If most of the reviews are good, then you’re good to hire from that company. A bad review from one customer should not put you away if most of the reviews are positive. That might just be a grumpy customer with issues.

 electrical services melbourne

Find the following from the company

Are the electricians licensed? The electricians sent over must carry valid licenses that show they are qualified for the job.

What are the specific electrical repair services they are qualified to offer? Electricians offer various kinds of jobs, and it is important to check what they can offer you. There are several electrical jobs and knowing what the electrician is qualified for can help make the right decision.

Any experience? Experience is very crucial when hiring electricians. It is important to know the electrician hired as handled that tasked previously and delivered a good job. Do not shy away from requesting for contacts of their previous clients so that you can confirm their experience. There is the risk of property damage if you hire inexperienced electricians that are not sure about the job at hand.

Do they have the right equipment? This is the last thing you need to ask your electricians before you consider hiring them. Good electricians will always carry proper tools for work. The tools must be the latest in technology and ones that can help them handle their jobs perfectly.

 electrician moorabbin

Once you have all those things checked up, you can go ahead and schedule an interview with the chosen electricians. The interview is a way for you to get to know the electricians and build some level of trust with them. Listen to how the electrician acts and makes you feel. Does he/she answer questions you ask with confidence? The electrician must make you feel comfortable and inspire you. They must be prompt in their timing and return your calls.

All About Sensor Light Installation

emergency electrical services

Does your watchman’s non-attendance trouble you while you’re asleep? This is true for almost everyone who lives in an independent villa or large apartment complexes. Sensor light installation is what can help you in this situation. A sensor light is a unique development by robotics experts who have made an attempt to make you feel safe and secure in your premises. It detects a moving object in an area and thereby turns on the lights to indicate to you the same.

Installing Sensor Light Installation

If you wish to keep your home and office safe, installing motion sensor light becomes important. There are several unwanted objects that enter your premises, you must detect them and restrict their entry. Though the sensor light installation is easy, the steps are different based on the brand you choose. You must go through the manual offered along with your desirable sensor light product.

However, here are some of the common steps to follow for sensor light installation.

Turn off the main switch

It is a common rule that whenever you are installing or working on electricity issues, you must ensure you have turned off the main switch. Once you turn off the main panel of the electricity, you must test the wire for the same to be sure. Don’t ignore otherwise it may be dangerous.

 local electrician sydney

To test the power, you can take one lead of a voltage tester and rub it against the ground wire. Now take another lead and rub it with the hot black-coloured wire first and then with the white-coloured neutral one. In any of the cases, if the tester lights up, your panel is yet not turned off. Therefore, you must check and assure of turning off the panel.

Install electrical box

You may have already decided on the places you want to install the sensor. Mark them. Drill them one-by-one. If your existing electrical box is unfit for the installation, install a larger and suitable one.

Do the wiring

As per the manual instructions, you need to mount the fixtures. Now you can connect the hot wires, neutral wires and ground wires with wire connectors. Once the electrical wiring is done, mount the fixture.

Specify the field & Set controls

If you are thinking that a single fixture mounting can detect the movement throughout your house, you’re wrong. You need to specify the field to be aimed at by the sensor light. It needs to be set according to the range restrictions. Read the manual and find out the distance range that it can cover and accordingly, set the controls.

 east brisbane electrician

Furthermore, when you install the set-up, you must take care of the electrical box cover, which surely needs to be weatherproof as well as waterproof. Besides, motion sensor light installation, there are solar sensor lights as well that you can get installed by following some of the common steps mentioned above.

If you are about to enter your house after attending a function and want to know if there is an intruder inside, sensor light installation can definitely help you. Above all, before opting for sensor light installation, you must obtain an electric permit from concerned departments. You may be subject to an inspection to find out if your electrical requirements comply with all the necessary electrical rules.

Why Are Electrical Specialists So Beneficial

emergency electrical services

Who are electrical contractors? They are the workers trained to work in various jobs that have to do with the installation, maintenance, and repair of systems that use electricity. These range from indoor to outdoor jobs. Indoor jobs will include homes businesses, commercial and industrial. An example of an outdoor job is street lighting. Electrical workers are divided into two; those that work with high voltages such as overhead power lines and those that work with relatively low voltages indoors. Most of the public’s interaction is this second group.

Because working with electricity can be hazardous, even fatal, training of electrical workers is rigorous The training and entry into the job market are structured in such a way that the lowest cadre of worker has to work as an apprentice under the supervision and guidance of more experienced colleagues. Getting a promotion will depend on qualification and experience. Therefore when hiring for emergency electrical services, the more qualified and experienced one is the better.

Some people with rudimentary to a non-existent knowledge of electricity will try to engage in DIY electrical repair and installation jobs .this can be a risky venture. It is best to let the experts handle it when it comes to electricity. These are the reasons.


 electrician east melbourne

An electrical specialist is registered and licensed; whether working as a freelancer or in a company. They are subjected to inspection which in turn gives you their customer peace of mind. This means they are bound by the rules and regulations governing their work. Because of their level of training, you can be guaranteed of quality work.

By hiring electrician Melbourne, you are guaranteed that standards of safety have been adhered to. This is especially important when making a claim from the insurance in case of a fire caused by an electrical fault. The insurance company can refuse to settle such a claim if the installation or maintenance work before the fire was not carried out by competent personnel DIY work with electricity will also expose you to risk of injury or death. Wouldn’t it be much better to let the expert handle it?

An electrical expert is also in a position to give expert advice. This is especially so if he is a local who is a part of the community. With a reputation to build and protect, chances are high that he will offer excellent service. Furthermore, your local electrical worker is likely to have worked with other experts in the building industry to know the best deals and advice accordingly. Add on to the fact that a local will know the specific challenges in your area such as the risk of floods; he can give relevant solutions to your needs.

 electrician ardross

Some electrical jobs plainly require an expert. It is only he who can discern a hidden problem. For this reason, troubleshooting of the not so obvious is better off in the hands of the specialist. Trying to save by cutting corners and hiring unqualified people might be more costly in the long run. Be smart. You can only benefit from using the experts.

Outdoor Lightning Installation Tips

Do you get to spend some time outside during the night? Well, you can do this is your outdoor space is well-lit where you can spend time there feeling warm and secure. Outdoor lighting is all about the installation of lights in our compounds or yards to enhance our outside space.

Safety – General lighting is good for safety, part of the reason you want to add an exterior lighting to your home is to prevent injuries by lighting paths. This will help reduce the risk of someone slipping and falling on your property.

Decor – The rightful choice in lighting can highlight the architecture and landscape of your home. It will help to showcase aspects of your landscaping design while bringing out the right amount of aesthetics.

Commerce – Outdoor lighting will help to add value to your house. The initial investment for your landscape lighting will have an immediate return by increasing your property value.

Illumination – This is the most obvious reason people opt for exterior lighting. You may want a way to light up your compound for those best evening moments with friends or families.

Security – Exterior lights help as an added security measure. It helps to keep away intruders. Installing motion lights instead of bright lights are the best for security reasons.

 electrician narangba


Before installing your exterior lights, you should consider certain factors like the environment. You don’t want to install lights that will cause light pollution. Outdoor lights should light places where they are only required. You also have to choose between the LPS and the LCD with LCD being considered the best option. The LED lights can easily be turned off when not in use or dimmed.  You can, either way, opt for solar-powered lights. This is actually the best option because they are eco and pocket- friendly. You can take the help of an electrician if necessary, to make the best selection.

There are different outdoor lighting types which are designated for various spots around your compound or yard. Some of these include:

  1. Outdoor wall lighting-includes wall lanterns which enhance a home’s landscaping by providing a source of indirect up lighting and down lighting.
  2. Post lanterns.
  3. Outdoor ceiling lights which usually hung above the entrance doors.
  4. Deck and step lights which illuminate walkways and sidewalks. They are installed low to the ground for safety and security.
  5. Floodlights which offer maximum safety and security since they cast a wide area discouraging intruders.
  6. Cave lighting. This is used to highlight swimming pools, fountains, and walkways

 electrician oakleigh


Plan and identify the areas of your yard and house you want to illuminate and then create a lighting plan. See if the area is well lit and identify dark areas

  • Do the math – determine the lighting design you want and estimate how much light space requires.
  • Go for fixtures that help you save on energy. Try looking for solar powered lamps which are much cheaper and Eco-friendly, or you can alternatively opt out for the LED lamps
  • Control the light: Here consider installing light controllers such as motion sensors dimmers, motion sensors and many more that help saves energy.
  • Select durable materials. Make sure all of your outdoor fixtures are weather-resistant, durable and are shielded. They should be resistant and performs well in every climate.
  • Highlight your home’s best features. Emphasize textures, sculpts and architectural features like swimming pools, outdoor entertainment areas walkways and driveways.

5 Common Plumbing Problems That Happen During the Summer

With summer’s arrival, homeowners everywhere are preparing their home for their annual barbecues and pool parties for some fun in the sun. With so much excitement, your plumbing system might be the last thing on your mind. This guide will help prepare you and your home for what’s to come and how you can avoid these issues for a care-free summer.

Here are 5 common plumbing problems that happen during the summer.

Clogged Toilets

With a large family, your toilets are more prone to work double time during the summer season. While some children enjoy playing in the bathroom, other children will use more toilet paper than they should. Take every opportunity to discuss these issues with your family and keep a plunger on hand for any mishaps that might occur.

Sprinkler Issues

Automatic sprinklers tend to fall apart within a few years at a time. This leads to broken sprinkler heads that end up wasting water. Fix your broken sprinkler heads by removing the oldheads with new replacement.

Backups in the Sewer Line

Sewers can often get backed up during the afternoon storms. As a result, the ground will become saturated with rain and leave your sewers backed up. Install a drain plug to prevent any water from backing up.

Leaks in the Washing Machine

With summer break, kids will more likely be at home. As a result, your washing machine will run more than usual. To prevent a sudden leak, be sure to check the hoses for any possible leaks. If there is one, replace your hose immediately. Consider investing in a stainless steel hose as they will last longer than rubber material.

Clogged Garbage Disposal

With more summer festivities and parties, your garbage disposal will get more use than normal. Luckily, a clogged garbage disposal can be preventable. You can avoid this by flushing only the appropriate waste. Avoid coffee grounds, grease, and oil. If your disposal begins to clog, try boiling water and vinegar.

Is your home plumbing system ready for the summer? Have you had your annual checkup? Comment below and share your thoughts with us!